Item Description: Headlight restoration kit lets your shine and restores plastic lenses, including headlights, taillights, fog and directional lights. Restoring clarity of the lens will improve the performance of the headlight, and the appearance of the vehicle is enhanced. Now you can produce professional results with the headlight lens restoration kit. Kit includes all equipment includes all items necessary to perform the task except for the masking tape.
Features and Advantages:
1. Designed to restore clarity to headlight lenses that have become yellowed, cloudy, or hazy.
2. Headlight restoration kit improves the performance of the headlight.
3. Three easy steps: sand, polish and protect.
4. Easier than replacing an old headlight
5. Comes with easy-to-use instructions.
6. Car headlight, restoration kit does not include household polishing machine.
7. Restores headlights, taillights, fog lights or directional lights.
8. This kit is intended to restore two headlights.
1x White Sponge Disc
1x Wool Polish Disc
1x Backer Pad M10 Thread
1x Masking Tape
1x Instruction Manual
2x 3ml UV Protection Liquid
1x 85gm Polish Paste
2x P2000 Sanding Discs
2x P1200 Sanding Discs
2x P800 Sanding Discs
Prepare: Clean the headlight lens with water. Mask off the surrounding perimeter of the lens to avoid scratching the paint of the vehicle.
Wet the sanding disc and attach it to the backer pad. Sand with three different grits to completely remove the heavy yellowing, fading, and corrosion.
Note: Use the sanding discs from coarse to fine: P800--> P1200--P2000 (The higher number means finer the sandling). Not doing so will result in restoration failure
Attach the wool polish disc to the backer pad and apply the polish paste. Polish the lens until the shine is restored to its original condition.
Note: For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.
Step3.Protect Clean the headlight lens and make sure the lens is dry before continuing this step. Make sure the headlight is not under sunlight(very important). Using the white sponge disc provided in the kit, evenly apply a layer of the protective liquid on the surface of the lens. Allow the protective liquid to sit and dry for 15 minutes. Then, allow the liquid to cure in direct sunlight for 1 to 2 hours.
After step 3, keep the lens dry and do not allow it to be exposed to moisture. Do not wash the car for 24 hours.
Note: Please avoid any sunlight when apply the protect liquid on headlight ( very important).